Telephone Equipment and Service

The EIA standard 19" racks are designed for the ultimate in configuration flexibility. The 6061-T6 high-strength aluminum alloy makes ICC’s rack lightweight and durable with excellent grounding characteristics. Available in black powder coated aluminum and plain aluminum. The 19" Standard rack includes: Roll topped threading (12/24" Standard) on both front and back. Slotted hole design on the base for easy adjustment. Two angled, top cross-members for maximum strength. Compatible with any cabinet or rack that conforms to EIA-310-D spacing standard specifications (5/8" x 5/8" x 1/2"). Easy assembly. 30 high quality, pilot point screws included. Assembly holes with steel threads to prevent any stripping during assembly.

These heavy duty shelves are specially designed to exceed the practical weight requirements of any communications closet. The single shelf unit easily accommodates bulky equipment. The double shelf unit is perfect for bigger and heavier equipment including computers, modems, or muxes. All shelf units are coated with a durable black powder finish. Mounting hardware is included.

This keyboard tray slides in and out on a ball bearing track for easy access. The keyboard tray is made of high quality steel and is coated with a durable black powder finish. Mounting hardware is included.

The 1.75" panel combines four horizontal and two vertical distribution rings for patch cord organization.

The 3.5" panel combines four horizontal and four vertical distribution rings for patch cord organization

The 1.75" panel combines two vertical distribution rings with 24 individual routing clips for patch cord organization and guidance.

The 3.5" panel combines four horizontal and four vertical distribution rings with 24 individual routing clips for patch cord organization and guidance.

The 1.75" interbay panel reduces cable bundle congestion and tension with five horizontal rings. Large ring openings allow for easier cable access at the front or the back of the distribution rack.

The 3.5" interbay panel reduces cable bundle congestion and tension with five horizontal rings. Large ring openings allow for easier cable access at the front or the back of the distribution rack.

Blank panels are designed to fill the open space between system panels on a standard 19" rack.

Vertical management rings provide high flexibility for front or back vertical cable management. These rings are typically mounted directly to the vertical rails of a 19" rack or on the sides of any ICC Hinged Wall Mount Bracket. When mounted, the rings extend from the panel providing a vertical trough for cable or patch cord management.

The hinged, wall mount brackets can be mounted directly to the wall. The 19" wide wall mount brackets are manufactured with a 6" depth to provide easy cable management and prevent excessive bending of cables in accordance with TIA-568-A standards. The wall mount brackets also provide a rear cable entry opening and hinged panel mount tab design to provide easy cable access. The MSHB uses standard EIA hole pattern and provides cable tie attachments to secure cable bundles.

The Rack Mount Rear Cable Management Bar can be mounted directly to the rack. It has cable tie Velcro feed throughs to enable cable routing in any direction and to immobilize and firmly secure the cables.

ICC’s Cable Management Rack comes complete with 6" Cable Channel along both sides of the rack to manage and conceal bulk cable vertically along the inside of the rack. The rack has several Cable Tie anchor points throughout the cable channel to secure cable bundles with VELCRO ties. Unique design allows this rack to accommodate raised floor configuations and support heavy data and Electronic equipment. Cable Management Rack includes: 10-32 tapped mounting holes on front and rear of rack Slotted hole design on the base for easy adjustment Two top cable troughs support and route large amounts of cable maintaining minimum bend radius Assembly holes with steel threads to prevent stripping during assembly VELCRO cable ties Easy assembly 10-32 Mounting screws 6" side Cable Channels concealing routed bulk cable Compatibility with any item that conforms to EIA-310-D spacing standard specifications (5/8" x 5/8"x1/2") Incorporated cable tie anchor points Cable management rings that mount to the front or rear of the rack and can be rotated to provide additional verticalorganization

This self squaring rack can be used for mounting virtually any data or telecommunications component. The all-steel Wall Mount Relay Rack is quick and easy to assemble, finished in a durable black powder coat. The rack is offered in an 18" depth with Rack Mount Space ranging from 8 space to 30 space. Includes rack screws. All wall mount racks feature 125 lbs. load capacity.

This open wall-mount design allows installers to swing equipment out once equipment is mounted on rack, simplifying wiring tasks. Cable tie points and Velcro tie loops can neatly organize routed cable throughout the rack, while a 150 lb. capacity provides enough strength to hold heavy equipment. Punching down can be accomplished while the unit is completely opened. The Swing Gate Wall Mount Rack comes in 18" depths, and 12 and 20 Rack Mount Space with black powder coat finish. 10-32, rack screws and Velcro tie is included.

Ideal for wall-mounting patch panels and network equipment. The Vertical Hinged Bracket offers rear access, which facilitates punching down, simplifying an installation. There are cable tie points throughout the Vertical Hinged Bracket for cable management. The sturdy all steel construction is finished in a durable black powder coat. Rack screws and Velcro tie loops are included. Offered in 12" and 18" depths with 6 or 8 Rack Mount Space. Shown with Top Cover to keep out dust (optional).

Features:

Left or right hand installation
Open wall mount design lets you swing equipment out to greatly simplify wiring tasks
Innovative “positive stop” design facilitates punching down while fully open Tie points and Velcro cable ties included for cable routing

Available in depth after 18"
150 lb. Weight capacity
Durable powder coat finish

The ICC Vertical Cable Channel is a rack accessory featuring swivel latches and anchoring points for either cable ties or VELCRO ties to provide cable management and routing up and down a rack. The cable channel comes in a 3 foot section made of .090" aluminum with mounting holes that allow it to be attached to any size rack using the provided bolts. This is a perfect item to use between racks where there is a large amount of cable being routed and terminated. The cable channel has other mounting features that allow two sections to be fastened together to make a longer channel and will accommodate taller racks. The Cable Channel mounting features include: back-to-back mounting option to accommodate cable management in front and rear of rack. Stack two Cable Channels to accommodate large racks.

This keyboard tray is equipped with a built in mouse tray that can be pulled out to either the right or the left side. The mouse tray retracts out of the way when not in use.

These vented shelves are designed to provide air flow to ventilate mounted equipment. The vented shelves are made of high quality steel and are coated with a durable black powder coat finish. Mounting hardware is included.

This Heavy Duty Equipment Shelf is designed to hold up to 250 lbs., making it ideal for mounting heavier Data or Electronic equipment. The rack mounting brackets are adjustable making this shelf compatible with either 3" or 6" Rack rails.

The new N-CMSCMPR3 and the N-CMSCMPR4 Cable Management Rings can be mounted on a rack providing vertical cable management and routing on the sides.

Thirty 12-24 screws with pilot points to make inserting the screws very easy.

Rack Hardware Replacement Package: The N-ACSBW package contains twelve #3/8-16 bolts and washers for rack assembly, plus thirty 12-24 pilot point screws. Grounding Kit: The ICC Grounding Kit includes a universal grounding terminal with the necessary mounting hardware. The kit can be used to terminate grounding cables to necessary panels, racks, etc.