Telephone Equipment and Service

Expandable to 8 lines 16 telephones
Super Hybrid Station Ports can support digital PITS (KX-T7200 and KXT400 Series), Analog PITS (KX-T7000 Series), and 2500-Set Compatible Devices
Extra Device Ports (XDP) Support
Initially Configured for 4 CO Lines and 8 Extensions
Expandable to 8 CO Lines and 16 Extensions 32 Station Capacity (max.) with XDP 1
Voice Mail Programmable Ports
Automatic Route Selection (ARS)
oll Restriction
Speed Dialing
Internal/External Paging
Day/Night Service
Door Phone/Door Opener 3
Conference Call
External Music Source
Call Pick-Up

Expands to `12 lines 32 telephones. Two systems can be run in tandum for a capacity of 24 lines 64 stations.

Super Hybrid Station Ports can support Digital PITS (KX-T7200 and KX-T7400 Series), Analog PITS (KX-T7000 Series), and 2500-Set Compatible Devices Extra Device Ports (XDP) Support 8 CO Lines and 16 Extensions (Basic Configuration), Expandable to 12 CO Lines and 32 Extensions System Interconnection Doubles Capacity to 24 CO Lines and 64 Extensions 64 Station Capacity 1 with XDP on Single Cabinet, 128 Station Capacity 2 on Double Voice Mail Programmable Ports Automatic Route Selection (ARS) Enhanced DISA 2 Door Phone/Door Opener

Connects up to Two Door Intercoms (KX-T30865), Provides Two Contact closures to operate Electronic Door Locks, Compatible with either the KX-TD816 all versions, KX-TD 1 232 all versions

8 Circuits, Compatible with Digital Sets (KX-T7200 & 7400 Series), Analog Proprietary Sets (KX-T7000 Series) or Single Line Type Devices. 1 per 816, 2 per 1232.

Panasonic 8 Circuit, Station Expansion Module - Allows for 8 additional digital stations PLUS eight additional SLT analog stations on the base KSU. Unit is easy to install and plugs in via connector on the front panel of the control unit.

8 Circuits, Compatible with Digital Sets (KX-T7200 & 7400 Series), Analog Proprietary Sets (KX-T7000 Series) or Single Line Type Devices. Only one single line type caller ID device (SLT w/CID or PC modem) can connect to either ports one or two (defined in system programming), Compatible with KX-TD816-3&4 & KX-TD1232-3&4

CO Card (4 Circuit) Adds Four Additional Loop Start CO Lines to Panasonic KX-TD1232 and KX-TD816 Systems. (Maximum 1 Card Per KX-TD816 or KX-TD1232 Phone System KSU)

4 Circuits for Direct Inward Dial (DID) CO lines Compatible with KX-TD816-3&4 AND KX-TD1232-3&4

24 Channels per card, Channels can be assigned LCO, GCO, DID, OPX or Tie (E&M) voice only, Maximum of 1 card per system, For use in the KX-TD1232-4 system ONLY, Must be installed in he master cabinet, The KX-TD180, KX-TD185, KX-TD284, KX-TD382, KX-TD384 and KX-TD386 cannot be used when the KX-TD187 is installed. The 8 basic COs in the m Service Unit CSU is required .(KX-TCSU recommended)

Two Circuits, One per KX-TD1232 all versions cabinet, Allows Direct Inward System Access, Provides 64 Sec. of Digitally Recorded Voice for Simple Auto Attendant, Timed Reminder with OGM, UCD OGM, Compatible with KX-TD1232 all versions ONLY

Provides for connecting Two KX-TD1232's, of the same Software Version cabinet together. Includes 2 Circuit Cards and Cables, Compatible with KX-TD1232 all versions, Minimum Configuration - 16 x 32 Maximum Configuration with Expansion Cards and XDP 24 x 128

Allows Caller ID Information to appear on the Display of Proprietary Telephones and SMDR Printers, One Card required for Every Four Caller ID Compatible Central Office Lines Installed, Caller ID Service must be provided by the Telephone Company (NOT COMPATIBLE WITH CENTREX CALLER ID)

300/1200/2400 pbs, Compatible with KX-TD1 232 at 1200 pbs and KX-TD1232-1 or 2 at 2400 pbs, Provides for Remote System Live Programming and Diagnostics

Provides fro Remote System Live Programming and Diagnostics at 28.8 Kpbs for KX-TD1232-3 or 4 ONLY

Required to activate waiting lamps on standard single line telephones equipped with message waiting lamps, one KX-TD1 94 will support up to 16 MWL sets, Compatible with KX-TD816-3 or 4 and KX-TD1232-3 or 4

Provides fro Remote System Live Programming and Diagnostics at 28.8 Kpbs fof KX-TD816- 4 ONLY

One required in each control unit (KX-TD816-4, KX-TD1232-4) when one ISDN Module (KX-TD284, KX-TD382, KX-TD384, KX-TD386) is installed. Synchronizes ISDN with the system clock

4 ISDN Basic Rate Lines (Sfr point), Has 4 ports (RJ45 (8 wire) jacks) for either input (connection of BRI from Telco) or output (connection of ISDN CP such as G4 Fax or ISDN Telephone), Station Side ISDN devices can be connected (4 wire) in series up to 8 devices per port, Compatible with KX-TD816-3 or 4, KX-TD1232-3 or 4, KXTD1 12 Required, (Compatible with Lucent (AT&T) central office equipment and National ISDN 1 Service ONLY)

2 ISDN Basic Rate Lines (U point), For connection of up to 4 BRIs from Telco for voice traff ic over the PSTN (acts like a CO module) Compatible with KX-TD81 6-3 or 4, KX-TDI 232-3 or 4, KX-TD1 12 Required, (Compatible with Lucent (AT&T) central office equipment and National ISDN 1 Service ONLY)

4 ISDN Basic Rate Lines (U point), For connection of up to 4 BRIs from Telco for voice traffic over the PSTN (acts like a CO module) Compatible with KX-TD816-3 or 4, KX-TD1 232-3 or 4, KX-TD1 12 Required, (Compatible with Lucent (AT&T) central office equipment and National ISDN 1 Service ONLY)

6 ISDN Basic Rate Lines (U point), For connection of up to 6 BRIs from Telco for voice traff ic over the PSTN (acts like a CO module) Compatible with KX-TD816-3 or 4, KX-TD1 232-3 or 4, KX-TD1 12 Required, (Compatible with Lucent (AT&T) central office equipment and National ISDN 1 Service ONLY)

Includes Battery Charger, Overdischarge Protection, and Over-current Protector (Customer Provided Batteries and Cables Necessary)

The Express Power Pak is an easy to install reserve power source for the Panasonic KX-TD816 or KX-TD1 232 phone system. The Power Paks are self contained rechargable unit which are ready to mount and plug into the battery connection on the side of the phone system. The KX-A46 Adaptor is built-in. Specifications: 24 Volts, 15 Amp hours - Dimensions: 3" W X 9 1/2" L X 7 1/2 T - Backup Power : up to 8 hours coverage time will vary dependent upon system configuration and usage.

RMU Hardware and Cables - Fits the KX-TD816 and KX-TD1232 KSUs - Remote Programming is the most intellingent choice when programming and customization are critical, and only the best will do. Remote Phone System Custom Programming / Maintenance is available, FREE, with the purchase of a remote maintenance unit (RMU).

Ext. CSU - Channel Service Unit for T1 Bandwidth Management. (Must use with KX-TD187 T-1 Card)