Home >
  
Manuals and Documentation
Go To http://www.quick-manuals.com

Miscellaneous Remote Access

For Additional Information Call Telephone Equipment & Service 254-965-3501 or email ntcp@ntcp.com


Handset Interfaced Dialer (Model HD-1) 
NEW
   Add to basketBasket
Click Here
Click Here
 

The HD-1 allows DTMF signaling on systems that won't allow dialing after the initial dial string. This is often required for applications such as interactive Voice Response (IVR) systems and automated attendants.

Click here for more product information


Loop Detect Circuit (A-Lead Control) (Model LDB-1)  
NEW
   Add to basketBasket
Click Here
Click Here
 

Viking offers a loop detect board with contact outputs capable of handling up to 500mA. The LDB-1 will be more robust than current A-Lead control's available in the marketplace.

Click here for more product information


Loop/Ring Detect Circuit (Model LDB-2) 
NEW
   Add to basketBasket
Click Here
Click Here
 

The LDB-2 Ring/Loop Detector monitors an analog phone line for ringing or an in use condition. A built in relay can be activated when either or both of these conditions exist.

Click here for more product information


Remote Access Device (Model RAD-1) 
NEW
   Add to basketBasket
Click Here
Click Here
 

The RAD-1 allows remote access to PABX or Electronic Key system features as well as bridging to a second line or any other 600 ohm source. The RAD-1 provides two levels of security as well as basic toll restriction.

Click here for more product information


Amplified Remote Access Device (Model RAD-AMP) 
NEW
   Add to basketBasket
Click Here
Click Here
 

Similar to the RAD-1 in operation, the RAD-AMP provides a line amplifier and can also be configured as a "Call Forwarding/Call Diverter" device. In addition, the RAD-AMP will perform "International Call Back" services when configured with optional firmware.

Click here for more product information


Ring Booster with Caller ID Support! (Model RG-10A) 
NEW
   Add to basketBasket
Click Here
Click Here
 

The RG-10A ring booster provides the ability to ring additional phones when the phone company's ring voltage or another product's ring generator (such as ISDN Terminal Adapters) aren't enough. The RG-10A will boost REN to 15.0 and will work flawlessly with Caller ID services provided by the phone company.

Click here for more product information


Time Delay Relay! (Model TDR-1)  
NEW
   Add to basketBasket
Click Here
Click Here
 

The TDR-1 will provide users with the ability to fine tune available contact closures as well as change the characteristics from N/O to N/C and vice-versa.

Click here for more product information


Plastic Enclosures (Model VE-1, VE-2, VE-3) 
NEW
   Add to basketBasket
Click Here
Click Here
 

All of Viking's plastic enclosures are available for use with your own products. Contact Viking for pricing and minimum quantities.

Click here for more product information


Vandal/Weather Resistant Surface Mount Box (Model VE-5x5) 
NEW
   Add to basketBasket
Click Here
Click Here
 

The VE-5x5 allows the E-10, W-1000 and W-3000 to be surface mounted to a single gang box, a wall, or a gooseneck.

Click here for more product information


Vandal/Weather Resistant Surface Mount Box (Model VE-6x7) 
NEW
   Add to basketBasket
Click Here
Click Here
 

The VE-6x7 allows the K-1700-3 to be surface mounted to a single gang box, a wall, or a gooseneck.

Click here for more product information


Vandal/Weather Resistant Surface Mount Box (Model VE-5x10) 
NEW
   Add to basketBasket
Click Here
Click Here
 

The VE-5x10 allows the K-1500-7, K-1900-7 and K-1900-8 to be surface mounted to a single gang box, a wall, or a gooseneck.

Click here for more product information


Go To Manuals and Documentation 
   Add to basketBasket

Go To
http://www.quick-manuals.com



For a listing of manuals follow the link below.






Go To
http://www.quick-manuals.com




Click here for more product information


ShopFactory (TM). Click Here.