Multi-Input Voice Dialer/Announcer (Model K-2000-DVA)

NEW
The K-2000-DVA will dial up to 8 numbers for each of its 8 triggered contact inputs and play a user recorded announcement describing the alarm condition. Altenatively, the unit may be used as an 8 message store caster for department stores, grocery stores, etc.
Voice Alarm Dialing or Store Caster Announcements from up to Eight Inputs
Viking Electronics’ K-2000-DVA is a fully programmable multi-input, multi-number auto dialer with digitally recorded message capability, used for emergency and non-emergency message notifying. The K-2000- DVA has eight dry contact inputs which when tripped will sequentially dial up to 8 phone numbers and play a recorded message corresponding to the input tripped.

The K-2000-DVA can store up to seven 16 digit phone numbers and one 32 digit phone number (for use with pagers) per input, for a total of 64 numbers. The unit is capable of local or remote recording of up to 8 different messages, with a total recording time of one minute.

The K-2000-DVA can also be configured as a store caster (no dialing), for applications such as on-site department or promotional announcements.

Applications
  • Vending machine failure notification
  • Environmental warning notification
  • System alarm or malfunction notification
  • Automatic telephone messaging paging
  • Store caster for promotional announcements in department stores, grocery stores, hardware stores, gas stations, etc.
Features
  • Non-volatile memory (no batteries required)
  • Stores up to seven 16-digit numbers and one 32 digit phone number per input trigger
  • 60 seconds of record capability
  • Programmable message repeat counter
  • Programmable lap counter for dialing groups of phone numbers
  • Eight programmable normally open/closed trigger inputs
  • Programmable ring delay for remote programming and remote alarm polling
  • Pager compatible
  • Remote polling capability to determine triggered inputs
  • Remote security and access codes
  • Programmable store caster mode
  • CPC break detection
  • Local or remote programming and recording
  • RS-232 port for programming via PC
  • Compatible with the RC-2A and RC-3 remote DTMF controllers
  • One year warranty
  • Made in the USA
Specifications
  • Power: 120V AC/12V DC 500 mA, UL listed adapter provided
  • Dimensions: 133mm x 130mm x 38mm (5.25" x 5.1" x 1.5")
  • Shipping Weight: 1.36 kg (3 lbs.)
  • Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
  • Touch Tone Dialing: 120 ms on/off
  • CPC Detection Time: 320 ms minimum
  • Message Record Time: 60 seconds
  • Sampling Rate: 64 k
  • Momentary Trigger Input: 100 ms minimum normally open/normally closed
  • Connections: (2) RJ11 jacks for 600-ohm audio output and telephone line/phone, (1) 9 pin RS-232, (1) 10 position screw terminal block for dry contact trigger inputs